FLUKE - Clamp meter - ไทยพัฒนสิน แมชชีนทูลส์ - ผู้นำด้านเครื่องมือช่าง อันดับ1 ด้านคุณภาพเกรดอุตสาหกรรม

THAIPHATTOOLS
THAI PHATTANASIN MACHINE TOOLS
THAI PHATTANASIN MACHINE TOOLS
Member Click Here--->
Member Click Here--->
THAI PHATTANASIN MACHINE TOOLS
THAIPHATTOOLS
THAIPHATTOOLS
THAIPHATTOOLS
Go to content

FLUKE - Clamp meter

แบรนด์นำเข้า > FLUKE
Clamp Meter
Go to work with the best
True-rms measurements and optimised ergonomics make the 320 Series True-rms Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.

• 400 A AC current measurement (AC and DC current; 325 only)
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement to up to 40 kΩ with continuity detection
• Temperature and capacitance measurement (324 and 325 only)
• Frequency measurement (325 only)
• Slim, ergonomic design
• Large, easy to read backlight display (324 and 325 only)
• CAT IV 300 V/CAT III 600 V safety rating
• Hold button
• Two-year warranty
• Soft carrying case
฿ 6,000.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Go to work with the best
True-rms measurements and optimised ergonomics make the 320 Series True-rms Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.

• 400 A AC current measurement (AC and DC current; 325 only)
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement to up to 40 kΩ with continuity detection
• Temperature and capacitance measurement (324 and 325 only)
• Frequency measurement (325 only)
• Slim, ergonomic design
• Large, easy to read backlight display (324 and 325 only)
• CAT IV 300 V/CAT III 600 V safety rating
• Hold button
• Two-year warranty
• Soft carrying case
฿ 9,200.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Go to work with the best
True-rms measurements and optimised ergonomics make the 320 Series True-rms Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.

• 400 A AC current measurement (AC and DC current; 325 only)
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement to up to 40 kΩ with continuity detection
• Temperature and capacitance measurement (324 and 325 only)
• Frequency measurement (325 only)
• Slim, ergonomic design
• Large, easy to read backlight display (324 and 325 only)
• CAT IV 300 V/CAT III 600 V safety rating
• Hold button
• Two-year warranty
• Soft carrying case
฿ 13,800.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Versatile, professional, accurate
Confidently take reliable readings with the true-rms Fluke 355 and 353 Clamp Meters—the tools of choice for high current clamp-on amp meter measurements up to 2000 A.

• Reliably handle a wide range of high-current applications with 2000 A AC+DC true-rms, 1400 A AC, and 2000 A DC
• Large 58 mm (2.3 in) jaw
• Inrush current measurement
• High voltage measurement of 1000 V AC+ DC true-rms, 600 V AC, and 1000 V DC (355 only)
• Resistance to 400 KΩ (355 only)
• Continuity beeper (355 only)
• Frequency measurement to 1 KHz
• Selectable low-pass filter mode
• Min/Max/Avg
• Large display with backlight
฿ 36,600.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Versatile, professional, accurate
Confidently take reliable readings with the true-rms Fluke 355 and 353 Clamp Meters—the tools of choice for high current clamp-on amp meter measurements up to 2000 A.

• Reliably handle a wide range of high-current applications with 2000 A AC+DC true-rms, 1400 A AC, and 2000 A DC
• Large 58 mm (2.3 in) jaw
• Inrush current measurement
• High voltage measurement of 1000 V AC+ DC true-rms, 600 V AC, and 1000 V DC (355 only)
• Resistance to 400 KΩ (355 only)
• Continuity beeper (355 only)
• Frequency measurement to 1 KHz
• Selectable low-pass filter mode
• Min/Max/Avg
• Large display with backlight
฿ 41,200.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
The Fluke 365 Clamp Meter offers a small, detachable jaw—with 1.2 metres ofcoil—that makes it easy to take and read measurements in tight or hard-to-reachplaces.

• 200 A AC and DC current measurement
• 600 V AC and DC voltage measurement
• 6000 Ω resistance measurement
• Built-in flashlight
• Large, easy-to-read backlight display
• Three-year warranty
฿ 11,500.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Be ready for anything
Our family of true-rms clamp meters provides a range of state of-theart features to meet even the most demanding job requirements. All four of the clamp meters have improved base features such as a large, backlit display, true-rms standard, CAT IV safety rating and a durably constructed body. Additionally, the 376, 375 and 374 are compatible with the iFlex® Flexible Current Probe (included with the 376, sold separately for the 375 and 374), and provide increased measurement readings to 1000 A and 1000 V AC and DC.
฿ 11,500.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Be ready for anything
Our family of true-rms clamp meters provides a range of state of-theart features to meet even the most demanding job requirements. All four of the clamp meters have improved base features such as a large, backlit display, true-rms standard, CAT IV safety rating and a durably constructed body. Additionally, the 376, 375 and 374 are compatible with the iFlex® Flexible Current Probe (included with the 376, sold separately for the 375 and 374), and provide increased measurement readings to 1000 A and 1000 V AC and DC.
฿ 16,000.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Be ready for anything
Our family of true-rms clamp meters provides a range of state of-theart features to meet even the most demanding job requirements. All four of the clamp meters have improved base features such as a large, backlit display, true-rms standard, CAT IV safety rating and a durably constructed body. Additionally, the 376, 375 and 374 are compatible with the iFlex® Flexible Current Probe (included with the 376, sold separately for the 375 and 374), and provide increased measurement readings to 1000 A and 1000 V AC and DC.
฿ 18,300.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
Be ready for anything
Our family of true-rms clamp meters provides a range of state of-theart features to meet even the most demanding job requirements. All four of the clamp meters have improved base features such as a large, backlit display, true-rms standard, CAT IV safety rating and a durably constructed body. Additionally, the 376, 375 and 374 are compatible with the iFlex® Flexible Current Probe (included with the 376, sold separately for the 375 and 374), and provide increased measurement readings to 1000 A and 1000 V AC and DC.
฿ 20,600.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
The Fluke 381 Clamp Meter combines iFlex flexibility with remote readingcapability for the ultimate in innovation and safety.

• Remote display reads measurements up to 9.1 metres away
• iFlex Flexible Current Probe included, 18 inch circumference
• 2500 A AC current measurement with iFlex
• 1000 A AC and DC current measurement with fixed jaw
• 1000 V AC and DC voltage measurement
• Frequency measurement to 500 Hz
• 60 kΩ resistance measurement
• Min/Max/Avg and inrush recording• CAT IV 600 V, CAT III 1000 V
• Three-year warranty
฿ 27,000.00(ไม่รวม VAT)
เพิ่ม
Clamp Meter
HVAC (heating, ventilation, air conditioning) technicians require a service tool that can consistently keep up with their demands. The Fluke 902 expands the existing line of qualityFluke clamp meters by delivering the features necessary to diagnose and repair HVAC systems. Combined with true-rms technology and a CAT III 600 V rating, the Fluke 902 helpstechnicians do their jobs safely and accurately.

• Designed for HVAC applications with capacitance, DC current (μA) and temperature measurements
• Small body and jaws fit perfectly in your hand and into tight places
• Handy “Display Hold” button keeps measurements on the display
• Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch)
• Three-year warranty
฿ 13,800.00(ไม่รวม VAT)
เพิ่ม
ADDRESS
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
MENU
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
ADDRESS
HOT LINE 081 443 5895
HOT LINE 0814435895
HOT LINE 0814435895
HOT LINE 0814435895
MEMBER
MAIN MENU
MEMBER
MAIN MENU
MEMBER
Back to content