FLUKE - Insulation & Earth Ground Tester - ไทยพัฒนสิน แมชชีนทูลส์ - ผู้นำด้านเครื่องมือช่าง อันดับ1 ด้านคุณภาพเกรดอุตสาหกรรม

THAIPHATTOOLS
THAI PHATTANASIN MACHINE TOOLS
THAI PHATTANASIN MACHINE TOOLS
Member Click Here--->
Member Click Here--->
THAI PHATTANASIN MACHINE TOOLS
THAIPHATTOOLS
THAIPHATTOOLS
THAIPHATTOOLS
Go to content

FLUKE - Insulation & Earth Ground Tester

แบรนด์นำเข้า > FLUKE
Insulation & earth ground testers
These lightweight, affordable insulation testers are perfect for troubleshooting, commissioning and preventive maintenance applications.

Features
• Automatic calculation of polarisation index and dialectric absorption ratio (1507 only)
• Multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V (1507 only)
• Remote test probe for rapid testing
• Insulation test range 0.01 MΩ to 10 GΩ (1507), 0.1 MΩ to 2000 MΩ (1503)
• Compare (Pass/Fail) function for repetitive tests (1507 only)
• Live circuit detection prevents insulation test if voltage > 30 V is detected
• Auto-discharge of capacitive voltage
• AC/DC voltage: 0.1 V to 600 V
• Lo ohms/Earth-bond continuity (200 mA) for checking connections and motor windings• Resistance: 0.01 Ω to 20.00 Ω
• One-year warranty
฿ 23,000.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
These lightweight, affordable insulation testers are perfect for troubleshooting, commissioning and preventive maintenance applications.

Features
• Automatic calculation of polarisation index and dialectric absorption ratio (1507 only)
• Multiple test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V (1507 only)
• Remote test probe for rapid testing
• Insulation test range 0.01 MΩ to 10 GΩ (1507), 0.1 MΩ to 2000 MΩ (1503)
• Compare (Pass/Fail) function for repetitive tests (1507 only)
• Live circuit detection prevents insulation test if voltage > 30 V is detected
• Auto-discharge of capacitive voltage
• AC/DC voltage: 0.1 V to 600 V
• Lo ohms/Earth-bond continuity (200 mA) for checking connections and motor windings• Resistance: 0.01 Ω to 20.00 Ω
• One-year warranty
฿ 27,500.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Evaluate the trends, eliminate the doubt
The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables.

Features include:

Test voltages to up 10 kV
CAT III 1000 V, CAT IV 600 V safety rating
Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
Long battery life gives the user over 750 tests between charges
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
Guard system eliminates the effect of surface leakage current on high-resistance measurements
Large digital/analog LCD for easy viewing
Capacitance and leakage current measurement
Ramp function for breakdown testing
Resistance measurements up to 2 TΩ
Timer settings up to 99 minutes for timed tests
3-year warranty
฿ 190,000.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Evaluate the trends, eliminate the doubt
The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making them ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables.

Features include:

Test voltages to up 10 kV
CAT III 1000 V, CAT IV 600 V safety rating
Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety
Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V
Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
Long battery life gives the user over 750 tests between charges
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
Guard system eliminates the effect of surface leakage current on high-resistance measurements
Large digital/analog LCD for easy viewing
Capacitance and leakage current measurement
Ramp function for breakdown testing
Resistance measurements up to 2 TΩ
Timer settings up to 99 minutes for timed tests
3-year warranty
฿ 226,200.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Two powerful tools in one
The Fluke 1587 FC and 1577 Insulation Multimeters combine a digital 1 kV insulation tester
with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which
provides maximum versatility for both troubleshooting and preventive maintenance.

• Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to 600 MΩ)
• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V, 1000 V), (1577: 500 V, 1000 V)
for many applications
• Live circuit detection prevents insulation test if voltage > 30 V is detected for added
user protection
• Auto-discharge of capacitive voltage for added user protection
• Filter for motor drive measurements (1587 only)
• AC/DC voltage, DC millivolts, AC/DC milliamps, resistance(Ω), and continuity
• Capacitance, diode test, temperature, Min/Max, and frequency (Hz) (1587 only)
• Auto power off to save battery power
• Large display with backlight and large digits
• Included accessories: Remote probe, test leads and probes, alligator clips, (Type K
thermocouple, 1587 only)
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for
other work
• Rugged, utility hard case allows you to bring everything you need for the job

The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions
through the Fluke Connect® Measurements app:

• PI/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated
insulation problems faster
• Memory storage through Fluke Connect eliminates writing down results, reduces errors
and saves data for historical tracking over time
• Temperature Compensation through app for establishing accurate baselines and relevant
historical comparisons
• Historical tracking and trending of assets identifies degradation over time, allows real-time
decisions to be made in the field with Fluke Connect® Assets
฿ 32,000.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Two powerful tools in oneThe Fluke 1587 FC and 1577 Insulation Multimeters combine a digital 1 kV insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventive maintenance.

• Insulation test (1587: 0.01 MΩ to 2 GΩ) (1577: 0.1 MΩ to 600 MΩ)
• Insulation test voltages (1587: 50 V, 100 V, 250 V, 500 V, 1000 V), (1577: 500 V, 1000 V) for many applications
• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
• Auto-discharge of capacitive voltage for added user protection
• Filter for motor drive measurements (1587 only)
• AC/DC voltage, DC millivolts, AC/DC milliamps, resistance(Ω), and continuity• Capacitance, diode test, temperature, Min/Max, and frequency (Hz) (1587 only)
• Auto power off to save battery power
• Large display with backlight and large digits
• Included accessories: Remote probe, test leads and probes, alligator clips, (Type K thermocouple, 1587 only)
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Rugged, utility hard case allows you to bring everything you need for the jobThe Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect® Measurements app:
• PI/DAR timed ratio tests with TrendIt™ graphs identifies moisture and contaminated insulation problems faster
• Memory storage through Fluke Connect eliminates writing down results, reduces errors and saves data for historical tracking over time
• Temperature Compensation through app for establishing accurate baselines and relevant historical comparisons
• Historical tracking and trending of assets identifies degradation over time, allows real-time decisions to be made in the field with Fluke Connect® Assets
฿ 36,600.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Stakeless testing
The Fluke 1621 Earth Ground Tester is a rugged, easy-touse tester for three-pole ground resistance measurements and two-pole AC resistance measurements. Earth ground resistance is measured by installing earth ground test electrodes, and testing with the Fluke 1621. Earth ground resistance measurements are used to ensure safe operation and reduce power qualityproblems. With a simple user interface and intuitive functionality, the large, clear LCD display provides highvisibility results in daylight or poor lighting conditions. The 1621 is lightweight making it ideal to test forlightning protection levels and periodic check-ups during routine maintenance.

• Easily capture values with single-button operation
• 3-pole Fall-of-Potential earth testing for basic measurements
• 2-pole resistance measurements for added versatility
• Ensure accurate measurements with automatic ‘noise’ voltage detection
• Hazardous voltage warning offers increased user protection
• Clearly read and record data with a large, backlit display
• Rugged holster and design for tough work environments
• Portable size allows for easy transportation
• Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting
• 600 V Cat II
฿ 49,000.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Stakeless testing
The Fluke 1623 and 1625 earth ground testers are able to measure earth groundloop resistances using only clamps. With this test method, two clamps are placedaround the earth ground rod and each are connected to the tester. No earth groundstakes are used at all.
With Stakeless testing, the earth ground rod does not need to be disconnected —leaving the bonded earth ground system intact during test. Gone are the days ofspending time placing and connecting stakes for each earth ground rod on yoursystem—a major time saver.

The most complete testers
The Fluke 1623-2 and 1625-2 are distinctive earth ground testers that canperform all four types of earth ground

measurement:
• 3- and 4-Pole Fall of Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only)

The Fluke 1625-2 improves your earth ground testing process with:

• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
฿ 86,300.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
Stakeless testing
The Fluke 1623 and 1625 earth ground testers are able to measure earth groundloop resistances using only clamps. With this test method, two clamps are placedaround the earth ground rod and each are connected to the tester. No earth groundstakes are used at all.
With Stakeless testing, the earth ground rod does not need to be disconnected —leaving the bonded earth ground system intact during test. Gone are the days ofspending time placing and connecting stakes for each earth ground rod on yoursystem—a major time saver.

The most complete testers
The Fluke 1623-2 and 1625-2 are distinctive earth ground testers that canperform all four types of earth ground

measurement:
• 3- and 4-Pole Fall of Potential (using stakes)
• 4-Pole Soil Resistivity testing (using stakes)
• Selective testing (using 1 clamp and stakes)
• Stakeless testing (using 2 clamps only)

The Fluke 1625-2 improves your earth ground testing process with:

• Automatic Frequency Control (AFC) - identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
• R* measurement - calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
• Adjustable limits - for quicker testing
฿ 142,000.00(ไม่รวม VAT)
เพิ่ม
Insulation & earth ground testers
The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display hold’ and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.

Stakeless testing system
The Fluke 1630 uses the Stakeless testing method, which eliminates the need to disconnect parallel ground rods and find suitable locations for placing auxiliary ground stakes. This saves time and enables users such as industrial and utility electricians, and field service electricians and contractors, to perform earth ground loop tests in locations where it is not possible to use other techniques, including inside buildings or on power pylons. With the Stakeless testing method, earth ground stakes are no longer necessary. The Fluke 1630 Earth Ground Clamp is placed around the earth ground rod or the connecting cable. A known voltage is induced by one half of the clamp and the current is measured by the other half. The tester automatically determines the ground loop resistance at this grounding connection.

• A wide ground loop resistance range, from 0.025 Ω to1500 Ω, to satisfy all requirements
• Large jaw opening of 35 mm (1.38 in) for tests on ground conductors and/or equipotential bus bars
• Measurement of ground leakage current, from 0.2 mA to 1000 mA, without needing to disconnect - ideal for system troubleshooting
• Wide AC current measurement range from 0.2 A to 30 A allows one instrument for multiple applications
• User-defined HI / LO Alarm limits, for rapid measurement evaluation• Handy ‘display hold’ button for capturing readings in hard-to-reach places
• Time saving memory function automatically records and stores measured values
• Automatic self calibration ensures correct measurement every time
• Overload protection: 200 A
• Carrying case and resistance test loop included
• ≥ 8 hours battery life (continuous operation)
฿ 82,300.00(ไม่รวม VAT)
เพิ่ม
ADDRESS
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
MENU
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
ADDRESS
HOT LINE 081 443 5895
HOT LINE 0814435895
HOT LINE 0814435895
HOT LINE 0814435895
MEMBER
MAIN MENU
MEMBER
MAIN MENU
MEMBER
Back to content