FLUKE - Process Calibration Tool - ไทยพัฒนสิน แมชชีนทูลส์ - ผู้นำด้านเครื่องมือช่าง อันดับ1 ด้านคุณภาพเกรดอุตสาหกรรม

THAIPHATTOOLS
THAI PHATTANASIN MACHINE TOOLS
THAI PHATTANASIN MACHINE TOOLS
Member Click Here--->
Member Click Here--->
THAI PHATTANASIN MACHINE TOOLS
THAIPHATTOOLS
THAIPHATTOOLS
THAIPHATTOOLS
Go to content

FLUKE - Process Calibration Tool

แบรนด์นำเข้า > FLUKE
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure Gauges designed to handle all your
Pressure Calibration needs

With best-in-class accuracy and measurements, the Fluke
700G Series Precision Pressure Test Gauges were designed
to handle all of your pressure calibration needs. The 700G
series pressure test gauges are rugged and easy to use, with
twenty three models ranging from ±10 inH2O/20 mbar to
10,000 psi/690 bar including absolute pressure ranges.

When combined with the Fluke 700PTPK or 700HTPK
you’ve got a complete pressure testing solution for up to 600
psi (40 bar) with the PTP-1 pneumatic pump and up to
10,000 psi (690 bar) with the HTP-2 hydraulic pump.

• Precision pressure measurement from ±10 inH2O/20 mbar to 10,000 psi/690 bar
• Absolute pressure measurement ranges 15, 30, 100, 300 psia
• Accuracy to 0.05 % of full scale
• Reference class gauge accuracies to 0.04 % of reading
• Easy to use, rugged construction for reliable performance
• CSA; Class 1, Div 2, Groups A-D rating
• ATEX rating: II 3 G Ex nA IIB T6
• Combine the Pneumatic Test Pump Kits and Hydraulic Test Pump Kits with any Fluke-700G Series Gauge, 1,000psi (69 bar) or less, to make a complete pressure testing
• Log up to 8,493 pressure measurements to memory (requires 700G/TRACK software)

Size (HxWxD) : 12.7 cm x 11.4 cm x 3.7 cm
Pressure connection : 1/4 in NPT Male
Housing/Weight : Cast ZNAL 0.56 kg with holster
Display : 5.5 digits, 16.53 mm high 20-segment bar graph, 0 to 100%
Power : Three AA alkaline batteries
Battery life : 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate
Warranty : Three years
฿ 52,300.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Fluke 707 and 705
• Innovative output adjustment dial on 707 provides
1 μA and 100 μA resolution and one-hand operation
• Large display and simple interface for ease of use
• Simultaneous mA and % readout for quick, easy
interpretation of readings
• mA accuracy of 0.015 % on the
Fluke 707 and 0.02 % on the 705
• HART™ mode on 707 connects 250 ohm
resistor in series with 24 V loop for
compatibility with HART communicators
• Push button 25 % steps for fast, easy
linearity checks
• “Span Check” for fast confirmation of
zero and span
• Selectable slow and fast linear step
ramp provide ramping outputs for valve
slewing, remote testing and loop
functional tests
• 24 V internal loop supply, so you can
power and read a transmitter at the
same time without carrying a DMM
• 0 to 20 mA or 4-20 mA default start up modes
฿ 39,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Fluke 707 and 705
• Innovative output adjustment dial on 707 provides
1 μA and 100 μA resolution and one-hand operation
• Large display and simple interface for ease of use
• Simultaneous mA and % readout for quick, easy
interpretation of readings
• mA accuracy of 0.015 % on the
Fluke 707 and 0.02 % on the 705
• HART™ mode on 707 connects 250 ohm
resistor in series with 24 V loop for
compatibility with HART communicators
• Push button 25 % steps for fast, easy
linearity checks
• “Span Check” for fast confirmation of
zero and span
• Selectable slow and fast linear step
ramp provide ramping outputs for valve
slewing, remote testing and loop
functional tests
• 24 V internal loop supply, so you can
power and read a transmitter at the
same time without carrying a DMM
• 0 to 20 mA or 4-20 mA default start up modes
฿ 41,200.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
The Fluke 709 and 709H mA loop calibrators are
designed to save time and produce high-quality results.
These calibrators are built around a user friendly
interface with a Quick-Set rotary encoder knob. This tool
reduces the time it takes to measure, or source, current
and power up a loop. The protective holster easily fits
into a technician’s hand and the large backlit display is
easy to read, even in dark, cramped worked areas.

• Best-in-class accuracy at 0.01 % reading
• HART Communication (709H only) communicate
with and test HART smart instruments
• Compact rugged design
• Intuitive user interface with quick-set knob for fast
setup, easy to use
• 24 V DC loop power with mA measure mode
• Resolution of 1 μA on mA ranges
• Built in selectable 250 Ω resistor for HART
communications
• Simple two wire connection for all measurements
• Valve test (source
and simulate defined mA values with % keys)
• Upload logged mA measurements and HART device
data using the 709H with optional 709H/TRACK
software
฿ 45,700.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
The Fluke 709 and 709H mA loop calibrators are
designed to save time and produce high-quality results.
These calibrators are built around a user friendly
interface with a Quick-Set rotary encoder knob. This tool
reduces the time it takes to measure, or source, current
and power up a loop. The protective holster easily fits
into a technician’s hand and the large backlit display is
easy to read, even in dark, cramped worked areas.

• Best-in-class accuracy at 0.01 % reading
• HART Communication (709H only) communicate
with and test HART smart instruments
• Compact rugged design
• Intuitive user interface with quick-set knob for fast
setup, easy to use
• 24 V DC loop power with mA measure mode
• Resolution of 1 μA on mA ranges
• Built in selectable 250 Ω resistor for HART
communications
• Simple two wire connection for all measurements
• Valve test (source
and simulate defined mA values with % keys)
• Upload logged mA measurements and HART device
data using the 709H with optional 709H/TRACK
software

HART Communication
The Fluke 709H offers a built-in HART modem for communication capability to perform the
following commands:
• Read message, tag, descriptor and calibration date
• Read sensor PV information and PV output information
• Read long tag
• Write PV ranges (upper and lower)
• Enter/exit fixed current mode and set zero offset
• Trim DAC zero (mA output 4 mA) and trim DAC gain (mA output 20 mA)
The Fluke 709H also offers the ability to store up to twenty HART device configuration files
for uploading via 709H/TRACK software, via the 709H/TRACK software. Configurations
can be stored as .csv or .txt files. This allows the end user to document plant HART easily
and it gives them direct access to key device parameters, allowing better troubleshooting,
calibrating and maintaining of plant assets.
฿ 61,700.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Accuracy and simplicity
The Fluke 712B and 714B are designed for both simplicity,
ease of use and high accuracy. They are a powerful
combination of temperature and loop calibration.

Fluke 712B RTD Calibrator
• Measure and simulate 13 different RTD types and
resistance
• Measure 4-20mA signals while simultaneously sourcing
a temperature signal
• Configurable 0% and 100% source settings for quick
25% linearity checks
• Linear ramp and 25% step auto ramp based on 0% and
100% settings
• Dual inputs and backlit display for easy interpretation of
measurements
• 1-year and 2-year specifications and traceable
certificate of calibration
฿ 73,200.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Accuracy and simplicity
The Fluke 712B and 714B are designed for both simplicity,
ease of use and high accuracy. They are a powerful
combination of temperature and loop calibration.

Fluke 714B Thermocouple Calibrator
• Measure and simulate 17 different thermocouple types
and millivolts
• Measure 4-20mA signals while simultaneously
sourcing a temperature signal
• Hanging tool designed in and included with every unit
• Configurable 0% and 100% source settings for quick
25% linearity checks
• Linear ramp and 25% step auto ramp based on 0%
and 100% settings
• Dual inputs and backlit display for easy interpretation
of measurements
• Power down settings remembered at power up for
easy restart of tests
• 1 and 2 year specifications and traceable certificate of
calibration
฿ 73,200.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Fluke 715 Volt/mA Calibrator
• Source voltage to 200 mV or 20 V
• Measure loop current (0 to 20 mA, 4-20 mA) signals with
0.01 % accuracy and 1 μA resolution
• Measure voltage output process signals from PLCs,
transmitters
• Source or simulate 4-20 mA loop current
• 24 V loop supply with simultaneous current measurement
• Ramp and Step Ramp output functions
฿ 68,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Measure up to 10,000 psi/690 bar sensor (10000G model)
• Compatible with non-corrosive gases and liquids
฿ 78,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• 1, 30, 100 and 300 psi ranges available
• Pump to 300 psi, 20 bar with internal
pump (718-300G)
• 718-1G includes special low volume pump
and high measurement resolution for low
pressure calibration
฿ 141,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• 1, 30, 100 and 300 psi ranges available
• Pump to 300 psi, 20 bar with internal
pump (718-300G)
• 718-1G includes special low volume pump
and high measurement resolution for low
pressure calibration
฿ 141,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• 1, 30, 100 and 300 psi ranges available
• Pump to 300 psi, 20 bar with internal
pump (718-300G)
• 718-1G includes special low volume pump
and high measurement resolution for low
pressure calibration
฿ 141,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• 1, 30, 100 and 300 psi ranges available
• Pump to 300 psi, 20 bar with internal
pump (718-300G)
• 718-1G includes special low volume pump
and high measurement resolution for low
pressure calibration
฿ 141,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Electric pump enables one-handed pressure
pumping and makes pressure calibration
quicker and easier
• Best in class 0.025 % pressure measurement
accuracy
• Programmable pump limit settings can
eliminate over-pressurisation—set ‘pump to’
pressure values
• Two ranges, 30 psi and 100 psi
฿ 183,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Common Features
• Pressure switch test makes a difficult task easy, captures set, reset and
deadband values of a pressure switch
• 717 and 718 measure pressure to 0.025 % of full scale with internal sensor
• Measure mA with 0.015 % accuracy and 0.001 mA resolution, while
sourcing 24 V loop power
• Electric pump enables one-handed pressure
pumping and makes pressure calibration
quicker and easier
• Best in class 0.025 % pressure measurement
accuracy
• Programmable pump limit settings can
eliminate over-pressurisation—set ‘pump to’
pressure values
• Two ranges, 30 psi and 100 psi
฿ 183,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Eliminate the hassle of hand pumping!

The Fluke 719Pro is an exciting enhancement of the popular
original 719 pressure calibrators. Notable improvements
include expanding the pressure measurement range of the
100 PSI model up to 150 PSI and the addition of a 300 PSI
range. The 719Pro adds a backlit display and precision
temperature measurement with the addition of an accessory
RTD probe available as a new accessory.

• Electric pump for one handed pressure calibration
• Best in class pressure measurement uncertainty of 0.025%
• Variable release rate bleed valve for easy pressure
adjustment
• 30 PSI, 150 PSI and the long requested 300 PSI (2,10 and
20 bar) pressure ranges
• Programmable pressure calibrator pump limit eliminates
over-pressurisation and allows the user to program target
pressures for pumping
• Extended pressure measurement range with any of 48
750PXX Pressure Modules
• Source mA with simultaneous pressure measurement to
test valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Test pressure switches with built in switch test function
• Power transmitters during test using 24 V loop supply
with simultaneous mA measurement
฿ 200,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Eliminate the hassle of hand pumping!

The Fluke 719Pro is an exciting enhancement of the popular
original 719 pressure calibrators. Notable improvements
include expanding the pressure measurement range of the
100 PSI model up to 150 PSI and the addition of a 300 PSI
range. The 719Pro adds a backlit display and precision
temperature measurement with the addition of an accessory
RTD probe available as a new accessory.

• Electric pump for one handed pressure calibration
• Best in class pressure measurement uncertainty of 0.025%
• Variable release rate bleed valve for easy pressure
adjustment
• 30 PSI, 150 PSI and the long requested 300 PSI (2,10 and
20 bar) pressure ranges
• Programmable pressure calibrator pump limit eliminates
over-pressurisation and allows the user to program target
pressures for pumping
• Extended pressure measurement range with any of 48
750PXX Pressure Modules
• Source mA with simultaneous pressure measurement to
test valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Test pressure switches with built in switch test function
• Power transmitters during test using 24 V loop supply
with simultaneous mA measurement
฿ 200,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Eliminate the hassle of hand pumping!

The Fluke 719Pro is an exciting enhancement of the popular
original 719 pressure calibrators. Notable improvements
include expanding the pressure measurement range of the
100 PSI model up to 150 PSI and the addition of a 300 PSI
range. The 719Pro adds a backlit display and precision
temperature measurement with the addition of an accessory
RTD probe available as a new accessory.

• Electric pump for one handed pressure calibration
• Best in class pressure measurement uncertainty of 0.025%
• Variable release rate bleed valve for easy pressure
adjustment
• 30 PSI, 150 PSI and the long requested 300 PSI (2,10 and
20 bar) pressure ranges
• Programmable pressure calibrator pump limit eliminates
over-pressurisation and allows the user to program target
pressures for pumping
• Extended pressure measurement range with any of 48
750PXX Pressure Modules
• Source mA with simultaneous pressure measurement to
test valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Test pressure switches with built in switch test function
• Power transmitters during test using 24 V loop supply
with simultaneous mA measurement
฿ 200,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Pressure calibration and temperature
measurement for custody transfer applications

The Fluke 721 Precision Pressure Calibrators
with dual isolated pressure sensors are the ideal tool for
gas custody transfer applications allowing you to take
simultaneous static and differential pressure measurements
with a single tool.

The 721 can be configured by selecting either a
16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then
add any of 7 high pressure ranges including 100, 300, 500,
1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200,
345 bar).

• IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025% accuracy
• Switch test on both pressure inputs
• Pt100 RTD input for temperature measurement, (probe
optional)
• Measures 4-20 mA signals
• Internal 24 V loop power supply can power a transmitter
under test (721 models only)
฿ 131,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Accuracy and simplicity
The Fluke 712B and 714B are designed for both simplicity,
ease of use and high accuracy. They are a powerful
combination of temperature and loop calibration.

Fluke 724 Temperature Calibrator
• Easy to read dual display allows for
input and output simultaneous view
• Source/measure TCs, RTDs, volts and ohms
• Measure mA while supplying loop power
• 25 % and 100 % stepping, auto-step and auto ramp
฿ 126,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
More calibration power!
• Two separate channels; measure, source and view
process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and
resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs,
frequency, and pressure to calibrate transmitters
• Measure or source pressure using any of 29 Fluke
750Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to
conduct valve and I/P tests
• Perform fast linearity tests with auto step and auto ramp
• Power transmitters during test using 24 V loop supply
and simultaneous mA measurement
• Store frequently-used test setups for later use
• Three year warranty
฿ 151,500.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
More calibration power!
• Two separate channels; measure, source and view
process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and
resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs,
frequency, and pressure to calibrate transmitters
• Measure or source pressure using any of 29 Fluke
750Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to
conduct valve and I/P tests
• Perform fast linearity tests with auto step and auto ramp
• Power transmitters during test using 24 V loop supply
and simultaneous mA measurement
• Store frequently-used test setups for later use
• Three year warranty
฿ 204,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 96,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 83,600.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 123,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 123,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 123,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Precision pressure measurement for 750
and 720 Series Calibrators

The Fluke 750P Series Pressure Modules are the ideal
pressure modules to enable gage, differential and
absolute pressure measurement with Fluke 750 and 740
Series DPCs and 725, 726 MPCs to measure pressure.
A family of 48 Pressure Modules covers pressure
calibrations from 0 to 1 in H20 to 10000 psi (2.5 mBar
to 690 bar).

• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Intrinsically safe models are Class I Div 1 Groups
A-D T4, Ta = 0 °C to +50 °C, ATEX II 1G Ex ia IIC T4
compliant
฿ 94,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Whether you’re calibrating instruments, troubleshooting
a problem or running routine maintenance, Fluke’s 750
Series Process Calibrators can help you get the job done
faster. They do so many different tasks, so quickly and so
well and they are the only process calibrators you need
to carry.

• Measure volts, mA, RTDs, thermocouples, frequency,
and ohms to test sensors, transmitters etc
• Source/simulate volts, mA, thermocouples, RTDs,
frequency, ohms, and pressure to calibrate
transmitters
• Power transmitters during test using loop supply
with simultaneous mA measurement
• Measure/source pressure using any of Fluke’s 48
Pressure Modules
• Measure and source simultaneously with one
compact, rugged, reliable tool
• Create and run automated as-found/as-left
procedures to satisfy quality programs or
regulations and record and document results.
• Advanced features like autostep, custom units, user
entered values during test, one-point and twopoint
switch testing, square root DP flow testing,
programmable measurement delay and more
• Control the temperature of selected Hart Scientific
Dry Blocks
• Handle fast pulsed RTD transmitters and PLCs in
RTD source mode with 1 ms response time
• Three-year warranty

Fluke 753: A complete Documenting Calibrator
The 753 is a complete multifunction documenting calibrator and includes a PC interface
that lets you load procedures, lists and instructions created with software—or unload data
for printing, archiving, and analysis. The 753 can hold a full week of calibrations and
procedures.
฿ 314,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Whether you’re calibrating instruments, troubleshooting
a problem or running routine maintenance, Fluke’s 750
Series Process Calibrators can help you get the job done
faster. They do so many different tasks, so quickly and so
well and they are the only process calibrators you need
to carry.

• Measure volts, mA, RTDs, thermocouples, frequency,
and ohms to test sensors, transmitters etc
• Source/simulate volts, mA, thermocouples, RTDs,
frequency, ohms, and pressure to calibrate
transmitters
• Power transmitters during test using loop supply
with simultaneous mA measurement
• Measure/source pressure using any of Fluke’s 48
Pressure Modules
• Measure and source simultaneously with one
compact, rugged, reliable tool
• Create and run automated as-found/as-left
procedures to satisfy quality programs or
regulations and record and document results.
• Advanced features like autostep, custom units, user
entered values during test, one-point and twopoint
switch testing, square root DP flow testing,
programmable measurement delay and more
• Control the temperature of selected Hart Scientific
Dry Blocks
• Handle fast pulsed RTD transmitters and PLCs in
RTD source mode with 1 ms response time
• Three-year warranty

Fluke 754: Get HART-ability™
The Fluke 754 offers all of the capabilities of the 753, plus the ability to calibrate, maintain
and troubleshoot HART instrumentation. Integrated HART communication functions
permit you to monitor, control and calibrate HART instrumentation. It handles fast pulsed
instruments such as RTD transmitters and PLCs responding to pulses within 1 ms.
฿ 392,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Don’t break the loop on 4-20 mA signal
measurements and save time with the Fluke 771,
772 and 773 milliamp Process Clamp Meters.

Use the Fluke 771 and 772 to:
• Source 4-20 mA signals for testing control system
I/O or I/Ps
• Simulate 4-20 mA signals for testing control
system I/O
• Measure 4-20 mA signals with in-circuit
measurement
• Power a transmitter with the 24 V loop power
supply
• Automatically ramp and step change the 4-20 mA
output for remote testing
฿ 30,000.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Don’t break the loop on 4-20 mA signal
measurements and save time with the Fluke 771,
772 and 773 milliamp Process Clamp Meters.

Use the Fluke 771 and 772 to:
• Source 4-20 mA signals for testing control system
I/O or I/Ps
• Simulate 4-20 mA signals for testing control
system I/O
• Measure 4-20 mA signals with in-circuit
measurement
• Power a transmitter with the 24 V loop power
supply
• Automatically ramp and step change the 4-20 mA
output for remote testing
฿ 45,700.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
Don’t break the loop on 4-20 mA signal
measurements and save time with the Fluke 771,
772 and 773 milliamp Process Clamp Meters.

Use the Fluke 773 to:
• Measure DC voltage to verify 24 V power supplies
or voltage I/O signals
• Source DC voltage to test voltage input devices
• Scaled mA output signal enables a logging DMM
(289) to record 4-20 mA signal without
breaking the loop
• mA in/out: simultaneously source a mA signal
while measuring a mA signal with the clamp
฿ 59,400.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
The Fluke 787 and 789 ProcessMeters combine a Digital
Multimeter and a Loop Calibrator in one rugged handheld
tool, giving process technicians double the power.

Fluke 787 ProcessMeter
• Simultaneous mA and % of scale readout on mA output
• 25 % Manual Step plus Auto Step and Auto Ramp on mA output
• Min/Max/Avg/Hold/Relative modes
• Externally accessible battery for easy changes
฿ 41,200.00(ไม่รวม VAT)
เพิ่ม
Process Calibration Tools
The Fluke 787 and 789 ProcessMeters combine a Digital
Multimeter and a Loop Calibrator in one rugged handheld
tool, giving process technicians double the power.

Fluke 789 ProcessMeter
Now compatible with Fluke Connect® App

The Fluke 789 ProcessMeter is the ultimate
troubleshooting tool for electricians and
instrumentation professionals, combining the
functionality of a loop calibrator with the power of
a digital multimeter. By equipping the 789 with a
temperature measurement module and the wireless data
logging capabilities of Fluke Connect® with ShareLive™
video call (sold separately), process technicians can now
do a lot more while carrying a lot less. Also with its
built-in, selectable 250 ohm HART® resistor, it eliminates
the need to carry a separate resistor with you.

• 24 V loop power supply
• CAT IV 600V rating
• Double-sized, dual display
• 20 mA drive into 1200 ohms
• 0 % to 100 % mA Span Check buttons to toggle
between 4-20 mA
• Infrared I/O serial port compatible with FlukeView®
Forms Software
฿ 45,700.00(ไม่รวม VAT)
เพิ่ม
ADDRESS
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
MENU
246, 248, 250 Kanchanaphisek Rd,
Kwaeng Bangkae, Khet Bangkae,
Bangkok 10160, THAILAND
Tel 02 455 5378-9, 02 455 5381-2
Email: sales@thaiphattools.com
tpmtool1@gmail.com
ADDRESS
HOT LINE 081 443 5895
HOT LINE 0814435895
HOT LINE 0814435895
HOT LINE 0814435895
MEMBER
MAIN MENU
MEMBER
MAIN MENU
MEMBER
Back to content